Join Today
Thanks Thanks:  0
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Jun 2015

    Need help: Grip End Weight

    The previous owner of my 08 managed to get this screw stuck into the threaded slot intended for a grip weight. My mechanic attempted to remove it by adding a nut - supposedly make it easier to grab.

    Question: If I totally disassemble the grip, is the threaded barrel a separate component from the handlebar or is it permanently attached to the handlebar?

    Here is a photo of the handle bar that has the problem and a photo of a normal handlebar.

    Sent from my SM-N950U using Tapatalk

  2. #2
    My Suggestion - Would be to Soak it with liquid Wrench -let it set- soak again -then attack it channel locks to remove the shaft. Needle Nose Channel Locks

  3. #3
    According to the parts fiche, there's should be a snap ring holding the entire piece in. There are four or five components listed.
    2012 Pearl White


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts